§ Evaluation kits

Boot. Flash. Build.

Every E1M module ships with a matching dev kit — full carrier-board break-out, with the module mounted on its spacer PCB. The E1M EVK's on-board RP2040 is the debugger and USB-UART console; the E1M-X EVK has a CP2102 console and takes an external SWD probe for flashing. You supply the power source and cables. The same kit also runs as your reference design when you move to production.

§ In the box

1× E1M SoM
mounted on its spacer PCB
1× EVK carrier
every peripheral broken out
E1M EVK debug
on-board RP2040 (U55): debugger + USB-UART console on J5
E1M-X EVK console
CP2102 USB-UART on J27; SWD probe on J2 for flashing (not included)
Factory image
factory MCUboot + self-test image (E1M-AEN)

Not in the box: a USB-C PD source or barrel-jack PSU, and USB cables. On the E1M EVK a SEGGER J-Link on J2 is an optional alternative to the on-board RP2040.